1 Day Forklift Ticket Pricing (with some pre-study)
- $ 295.00
WorkSafe Licence Fee
- $ 78.50 if you hold a current WA High Risk licence
- $ 100.00 if you do not hold a current WA High Risk licence
1 Day Forklift Ticket Dates
About the Course:
Transition from ‘Half Day’ to ‘1 Day’ courses:
In response to the COVID-19 restrictions implemented by the Australian Government, we introduced a half day course arrangement with only 3 candidates (participants). With the current easing of restrictions, we are transitioning to a 1 Day course with 6 candidates. The size of the classroom used for 1 Day courses allows for social distancing advice to be followed. Our 2 day courses are still suspended at this time.
Mandatory pre-study followed by a full day attendance:
Our 1 DAY with Pre-study Forklift course is for those who require a High Risk Work Licence to operate a forklift (LF class) issued from WorkSafe WA. The 1 DAY course includes mandatory pre-study that must be completed before you attend your course date. When you attend our venue in Rockingham, you will complete additional training before being assessed. Assessment includes written theory and calculations assessment and finally a practical assessment.
Once a booking has been made you will receive a Booking Confirmation with a link to access the pre-study – a document with Pre-Study Questions to prepare you for the knowledge and calculations assessments, followed by the Learner Guide. To complete the pre-study, read through the learner guide and complete the pre-study questions and practice calculations (calculators may be used), then go back and study the completed example questions several times until you feel confident that you know the information. Please be aware that the knowledge and calculations assessments are closed book (that is, you cannot look at any reference material or notes during the assessment), so it is vital you spend adequate time to learn the information.
Completing the pre-study is mandatory, however we do not require you to print the Learner Guide, if it can be accessed on a device. If you are not able to print the example questions, you should complete them on note paper to study. All students MUST bring the completed example questions with them when they attend the course. Students who do not bring the completed pre-study questions, WILL NOT commence training and another course date will need to be booked and paid for again.
You will receive a copy of the Learner Guide when you attend, however you are welcome to collect a copy of the Learner Guide and pre-study questions prior to attending your course date.
If you have experience in forklift operations, you may find the information is familiar and be able to complete the study in less time to feel confident in your knowledge. However, please be aware that the assessment is closed book (that is, you cannot look at any reference material or notes during the assessment), so it is vital you spend adequate time to learn the content of the Pre-study Questions.
If you have language or learning difficulties you may choose to ask a family member or friend to be a ‘study buddy’ to help you study and learn the information. However, please note that there is a level of reading, writing and numeracy required to complete this course with us, please see the LLN information below for what this means.
- Duration – One day. Face to face training and assessment runs from 7:30am – 5:00pm, and allow 2.5 hours for pre-study before you attend (all up approx 12 hours). Registration is at 7:20am
- Method – Self-paced study before you attend, then face-to-face training and assessment when you are here. You will complete a written theory and calculations assessment and practical assessment.
- This unit of competency is nationally recognised, those who complete this course successfully will be issued with a Statement of Attainment for TLILIC0003 Licence to operate a forklift.
- Successful completion will allow you to apply for a Forklift (LF class) High Risk Work Licence with WorkSafe WA
What the course covers:
- How to plan forklift work and identify and manage hazards
- How to prepare for forklift work and conduct routine checks
- How to assess and shift loads
- How to shut down, conduct post-operations checks and secure the forklift
There is no formal pre-requisite unit of competency required, however candidates MUST;
- Be able to understand, read and write English, have an understanding of numerical values and be able to do basic calculations (for further information on the level ability required, see ‘LLN’ below)
- Be at least 18 years of age or over
- Complete the mandatory pre-study and bring the COMPLETED pre-study questions
- Bring 2 forms of identification -1 x primary, 1 x secondary OR 2 x primary. All ID supplied must be current.
- Acceptable primary ID:
- Australian Driver’s Licence
- Proof of Age Card
- Current Passport
- Current High Risk Work Licence
- Birth Certificate
- Acceptable secondary ID:
- Medicare Card
- Current Credit or Debit Card
- Skippers Ticket
(For other acceptable forms of ID please contact our office)
- If you hold a valid high risk licence issued in a state other than WA you must bring it with you on the day of the course
- Bring 2 passport photos (ONLY IF YOU DO NOT hold a current WA High Risk Work Licence)
- Wear non-slip enclosed shoes
LLN – Language, Literacy and Numeracy Requirements:
To satisfactorily complete this training with us, learners need to be able to understand, read and write basic English and be able to complete basic maths. Calculators are supplied and used during training and assessment.
For example, at the very least, the learner would need to be able to (without assistance) READ and WRITE by following simple instructions like;
Look at the Risk Assessment
Find ‘Set up work area’
Write down what the ‘Potential Hazards’ are.
As an example of the basic maths a learner would need to be able to do to satisfactorily complete this course with us, see the problem below;
The load to move is a pallet of boxes, each box weighs 30 kg and there are 4 boxes on the pallet. The pallet weights 20 kg.
How heavy is the load?
Answer = 140 kg (4 x 30 = 120 kg; 120 + 20 = 140kg)
As an example of understanding numerical values, a learner will need to be able to read a ‘Forklift Load Chart’. In the basic load chart example below, can the forklift pick up a load of 1240kg when the mast is tilted forward by 3O.
|Forklift Load Chart|
|With a Vertical Mast||With Mast Tilted Forward 3O|
|Fork Height||Load Centre||Safe load in KGs||Fork Height||Load Centre||Safe load in KGs|
Answer = No
While understanding numerical values, reading and writing basic English is required, there are some adjustments that can be made if required.
For example, we can offer:
- Training material and assessments in larger print or on coloured paper (learners need to advise preferred colour prior to attending).
- Additional theory and/or practical training.
- Re-assessment opportunities following further training.
- Oral assessment
- Oral assessment may be offered only after a candidate has attempted the written assessment.
- All candidates who complete the theory assessment orally, are required to complete a supplementary assessment to demonstrate they are able to read, understand and write basic English. The supplementary assessment is similar to the examples given in LLN above and must be successfully completed by the candidate (on their own).
- It is unlikely that an oral assessment would be conducted on the same day the written assessment is attempted, as it requires a trainer to conduct it one on one with the candidate.
- When a candidate successfully completes an oral assessment, they will then be required to successfully complete the practical assessment to be judged as competent
The course is conducted at our training venue in Rockingham – Unit 1, 8 Day Road, East Rockingham, Western Australia.
Here's What YOU Will Be Doing When You Do Your Forklift Ticket
OUR "3 SHOTS" GUARANTEE
We are confident that the quality of our training resources and our experienced trainers will give you the best possible training for you to achieve required competency. So we will offer you a full, no questions asked, 100% money back guarantee if you don't pass the assessments.
Why do we offer this? It's simple - it is your hard earned money and putting your faith in our trainers and the quality of our training is what we value. We have full confidence in our trainers and assessors to deliver high level of training always.
We recognize that not everyone learns at the same level or time frame. That's why we are different - take the time that you need, to learn the way you feel is best for you.
At KG training & Assessing Pty Ltd we don’t just sign off everyone as “competent”. You still need to put in every effort to achieve a positive outcome. To assist you further, we offer flexible learning options for you to achieve a positive outcome. However, we guarantee to refund your fees if we feel that you will not be able to achieve desired competencies - sometimes even in the first attempt. Yes - we lose money but we put our learner’s needs over profit.
Here Is Another Activity YOU Do
All this talk is great, but what does the training centre look like? Here are a couple of images to give you an idea of the environment you will be doing your training in.
The machine for training
Inside a classroom
About KG Training
KG Training is a Registered Training Organisation (RTO) - Provider Number 52112. This means we are registered with the Training Accreditation Council so you can be sure we are legitimate.
Our trainers literally have decades of experience in industry, which means they know what it is like to be in your shoes. They are all down to earth people who enjoy a laugh and a joke whilst providing a professional service to you. I mean, all work and no play isn't very exciting!